170 4-2. Opening, closing and locking the doors
dia display.( �P. 609)
When the power back door settings have been changed, they will not be reset even if the power switch is turned off.
To return the settings to their previous values, it is necessary to use the settings screen of the multimedia display again.
Adjusting the open position of the back door( vehicles with a power back door)
The open position of the power back door can be adjusted. 1 Stop the back door in the desirable position.( �P. 163)
2 Press and hold the power back door switch on the back door for 2 seconds.
• When the settings are completed, the buzzer sounds 4 times.
• When opening the back door the next time, the back door will stop at that position. nReturning the back door automatic stop position to the initial settings
Press and hold the power back door switch on the back door for 7 seconds.
After the buzzer sounds 4 times, it sounds twice more. When the power back door does the opening operation the next time, the door will open to the initial settings position.
nCustomization
The automatic opening stop position
for the power back door can also be changed from the multimedia display.( �P. 609)
When the stop position has been set by both the vehicle side power back
door open / close switch and the multimedia display, priority will be given
to whichever one was set most recently.