118 2-2. Charging
n Charging indicator of the charging port flashes and charging cannot be carried out.
Likely cause
When charging indicator of the
charging port flashes normally *: Charging schedule is registered
When charging indicator of the
charging port rapidly flashes *: Malfunction occurred in an external power source or the vehicle
Correction procedure
When you wish to charge according to the charging schedule, wait until the set time.
To start charging, set“ Charge Now” to on.( �P. 109)
When a door is opened while the power switch is off, a message will be displayed on the multi-information display. Follow the instructions displayed on the multi-information display.
*: Refer to P. 82 for details regarding charging indicator of the charging port illumination and flashing.
When DC charging cannot be performed normally n DC charging does not start Likely cause
The DC charging connector is not properly connected to the vehicle.
The DC charging connector is not securely locked.
Correction procedure
Check the connection status of the DC charging connector and be sure that it is locked.
If the DC charging does not start, even though the DC charging connector is securely connected, there may be a malfunction with the DC charger or charging system. � If there is a malfunction with the DC charger, contact the charging station manager.
� If there is not a malfunction with the DC charger, there may be a malfunction in the system. Contact your SUBARU retailer.