644 8-2. Steps to take in an emergency
If the 12-volt battery is discharged
The following procedures may be used to start the EV system if the vehicle’ s 12- volt battery is discharged. You can also call your SUB- ARU dealer or a qualified repair shop.
Restarting the EV system
If you have a set of jumper( or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below. 1 Confirm that the electronic key is being carried.
When connecting the jumper( or booster) cables, depending on the situation, the alarm may activate
and the doors locked.( �P. 67)
2 Open the hood( �P. 561).
3 Open the positive(+) battery terminal cover.
While pressing on the claw, open the cover as shown in the illustration.
4 Connect a positive jumper cable clamp to on your vehicle and connect the clamp on the other end of the positive cable to on the second vehicle. Then, connect a negative cable clamp to on the second vehicle and connect the clamp at the other end of the negative cable to.
Use jumper cables that can reach the specified terminals and connecting point.