7-1. Maintenance and care
551
NOTICE
• Steering parts
• Suspension parts
• Brake parts
●Keep the cleaning nozzle at
least 11.9 in.( 30 cm) away from the vehicle body. Otherwise resin section, such as moldings
and bumpers, may be deformed and damaged. Also, do not continuously hold the nozzle in the same place.
●Do not spray the lower part of the windshield continuously. If
water enters the air conditioning system intake located near the lower part of the windshield, the air conditioning system may not operate correctly.
●Do not wash the underside of the vehicle using a high pressure car washer. If water enters the traction battery, the EV system may malfunction.
●Do not use the washer on the area around the charging port lid. Water could get into the charging inlet and could damage the vehicle.
■ Cleaning aluminum parts
When cleaning the hood, do not push hard or put weight on it. The aluminum part may be dented.
Cleaning and protecting the vehicle interior
Perform cleaning in a manner appropriate to each component and its material.
Protecting the vehicle interior
• Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water.
• If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral detergent diluted to approximately 1 %. Wring out any excess water from the cloth and thoroughly wipe off remaining traces of detergent and water.
■ Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a
sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and
let them dry. Excellent results are obtained by keeping the carpet as dry as possible.
■ Handling the seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts.
7
Maintenance and care