474 5-4. Using the driving support systems
■ When changing the target vehicle speed
When changing the target vehicle speed, adjust it with the accelerator pedal or the brake pedal. When the foot is removed from the pedal, the system will operate at the vehicle speed at that time.
■ Downhill Assist Control during“ X-MODE”
• In SNOW / DIRT mode or D. SNOW / MUD mode, the downhill assist control can be set to standby state. The operation indicator changes depending on the operating status of the downhill assist control.
• When the system is not operating, the indicator turns on white.
■ When Downhill Assist Control is not available when selecting“ X-MODE”
In the following cases, the system does not operate.
• When SNOW / DIRT mode or D. SNOW / MUD mode is not selected
• When the shift position is in P
• When the Grip control is operating
• When the brake system or EV system is malfunctioning
When using Grip control
With SNOW / DIRT mode or D. SNOW / MUD mode selected, press down on the Grip control switch.
At this time, the downhill assist control system indicator turns off and the Grip control indicator turns on.
When the vehicle is stopped, press the brake pedal firmly and operate the switch. The vehicle may start moving unintentionally on an incline.
■ Set the speed of the Grip control
Press the Grip control switch up or down to set the desired speed( approximately 2 to 6 mph [ 2 to 10 km / h ]). The set speed is shown on the multiinformation display.
Increase Speed Decrease Speed