454 5-4. Using the driving support systems
■ Suspension of the settings display
For safety purposes, you cannot display the custom settings screen while the vehicle is moving.
When using the Multi-terrain Monitor
Observe the following precautions. Failure to do so may result in an unexpected accident. Also, when driving, make sure to directly confirm the safety of your surroundings and the area to the rear of the vehicle.
WARNING
■ Conditions under which the Multi-terrain Monitor should not be used
Do not use the Multi-terrain Monitor in the following situations. The system may not operate properly, resulting in an unexpected accident.
●On icy or slick road surfaces, or in snow
●When using tire chains or emergency tires
●When the front door( s) or back door are not closed completely
●On roads that are not flat, such as hills
●If the tires of a size other than specified by SUBARU are installed
●If the suspension has been modified
●If a non-SUBARU product is installed on the area displayed on the screen
■ Guide lines
The tire position indicator lines and vehicle position indicator lines may differ from actual vehicle positions depending on the
number of passengers, cargo weight, road grade, road surface conditions, brightness of the surrounding environment, etc. Always drive the vehicle while confirming the safety of your surroundings.
NOTICE
■ Panoramic view
●See-through view, moving view, panoramic view, side clearance view, and cornering view produce an image that is a composite of images captured by the front camera, rear camera, and side cameras. As there is a limit to the displayable range and content, make sure you fully understand the features of the panoramic view monitor before you use it.
●The four corners of the seethrough view, moving view, panoramic view, side clearance view, and cornering view have a video composition processing
region centered on borders of the cameras, and image clarity may decline. However this is not
a fault.
● Depending on lighting conditions near each camera, bright and dark patches may appear on the see-through view, moving view, panoramic view, side clearance view, and cornering view.