5-4. Using the driving support systems
415
• Turning on auto display mode automatically displays the views in the following situations:
• When the shift position is in D or N
• The vehicle decelerates to less than 6 mph( 10 km / h)( the shift position is in any position other than R)
■ Front view & dual side views display
The screen can be displayed when the shift position is in P, D or N.
■ Tilt meter display
●The display indicates the incline of the vehicle in degrees shown by
the movement of the pointer and the rotation of the vehicle image.
●The color of the degree markers of incline to the front, rear, left and right changes according to the current incline of the vehicle.
●After the power switch is turned to ON, the degree of incline is not displayed until such information is determined
●The degree of incline showed on the tilt meter is only an approximate indication, and may differ from the degree of incline measured using other equipment.
●When the degree of incline is larger than 30 °, the pointer will be
displayed beyond 30 °.
●If the system malfunctions, the
vehicle image and pointer are not displayed. In this case, have the vehicle inspected by your SUB- ARU dealer.
■ Slip display
If the system malfunctions, the tire
icon is not displayed. In this case, have the vehicle inspected by your SUBARU dealer.
Under vehicle terrain view & dual side views
5
Driving
Lines indicating current vehicle and tire position are displayed in a composite view on an image taken behind the current vehicle position and assists the driver to check conditions underneath the vehicle or determine the position of the front tires.
To display the screen, press the camera switch when the shift position is in the P, D or N position.
• It is necessary to drive a certain distance or more for the image to be displayed.
• If the under vehicle terrain view display is selected while the screen is displayed, the screen switches from normal to magnified display.( Selecting the display again returns the screen to the normal display)