5-4. Using the driving support systems
395
• Register the parking space only if there are no obstructions within the area shown by the thick lines.
• The amount that the position of the parking spot to be registered can be adjusted is limited.
When parking in a parking space registered to the memory function
1 Stop the vehicle with it aligned near the center of the target parking space.
3 Select the desired parking space, and then select“ Start” button.
Perform the procedure for the perpendicular parking( forward / reverse) function from step 3.( �P. 382)
5
Approximately 3.3 ft.( 1 m)
2 Press the Advanced Park main switch and check that a possible parking space is displayed on the multimedia display.
If the“ MODE” button is displayed, the button can be touched to
change between the memory function, perpendicular parking( forward / reverse) function and parallel
parking function.
■ If you feel that the vehicle is approaching close to a surrounding vehicle, object, person, or gutter
�P. 384
■ When overwriting a registered parking space
If the maximum number of parking spaces have been registered and
is selected, a registered parking
space can be selected and then overwritten with a new parking space.
Driving