328 5-4. Using the driving support systems
■ Temporary cancelation of the function
●When the operating conditions are no longer met, a function may be temporarily canceled. However, when the operation conditions are met again, operation of the function will automatically be restored.
●If the operating conditions of a function are no longer met while
the function is operating, a buzzer may sound with a display to indicate that the function has been
temporarily canceled. If no driver’ s responses to the indication are detected, the driver emergency
stop assist function may operate. For types of display and action to be taken, see the page mentioned
below.( �P. 329)
■ Driving operations during controlled driving:
● Accelerator pedal As with normal driving, acceleration can be performed by depressing the accelerator pedal. When the accelerator pedal is depressed at approximately 6 mph( 10 km / h) or more, this function will be canceled.
● Brake pedal As with normal driving, deceleration can be performed by depressing the brake pedal. However, controlled driving will be cancelled.
● Steering wheel As with normal driving, the steering wheel can be operated. If the steering wheel is operated more than a certain amount, controlled driving will be cancelled.
■ When a warning message is displayed
●“ Traffic Jam Asst System Malfunction Visit Your Dealer”
The Traffic Jam Assist function may not be operating properly.
●“ Traffic Jam Asst Unavailable Stop Assist Activated”
The system temporarily cannot be used as the driver emergency stop assist function has operated.
Changing Traffic Jam Assist settings
• The setting of Traffic Jam Assist can be enabled / disabled through a customize setting.( �P. 680)
• The setting of driver monitor camera recording can be enabled / disabled through a customize setting.( �P. 680)