5-4. Using the driving support systems
311
� For Canada
Short press adjustment: By 1 km / h( 0.6 mph) or 1 mph( 1.6 km / h) each time the switch is pressed
Long press adjustment: Increases or decreases in 5 km / h( 3.1 mph) or 5 mph( 8 km / h) increments continuously while the switch is pressed and held
• Increasing the set vehicle speed using the accelerator pedal
1 Depress the accelerator pedal to accelerate the vehicle to the desired vehicle speed.
2 Press the“+” switch.
■ Canceling / resuming control
1 Press the cancel switch or driving assist switch to cancel control.
Control will also be canceled if the brake pedal is depressed.
( If the vehicle has been stopped by system control, depressing the brake pedal will not cancel control.)
■ Changing the vehicle-tovehicle distance
Each time the switch is pressed, the vehicle-to-vehicle distance setting will change as follows:
If a preceding vehicle is detected, the preceding vehicle mark will be displayed.
Illustration Number
Vehicleto-vehicle distance
1 Short
Approximate Distance( Vehicle Speed: 60 mph [ 100 km / h ])
Approximately 85 ft.( 25 m)
2 Medium Approximately 100 ft.( 30 m)
3 Long
Approximately 145 ft.( 45 m)
5
Driving
4
Extra long
Approximately 200 ft.( 60 m)
2 Press the“ RES” switch to resume control.
The actual vehicle-to-vehicle distance varies in accordance with the vehicle speed. Also, when the vehicle is stopped by system control, it will be stopped at a certain distance from the preceding vehicle, depending on the situation, regardless of the setting.