4-6. Favorite settings
209
●Driving position recall( only when the shift position is in P)
For details, refer to the“ MULTIME- DIA OWNER’ S MANUAL”.
■ Operating the driving position memory after turning the power switch to OFF
Recorded seat positions can be activated up to 180 seconds after the driver’ s door is opened and another 60 seconds after it is closed
again.
■ When recalling the driving position
Take care so that a head restraint does not contact the ceiling or a sun visor.
■ If the 12-volt battery is disconnected
The memorized positions are erased.
■ When the recorded seat position cannot be recalled
The seat position may not be recalled in some situations when the seat position is recorded in a certain
range. For details, contact your SUBARU dealer.
■ Jam protection function
While the driving position is recalled or the power easy access system is operating, if an object is stuck
behind the front seat, the front seat will stop and then slightly move forward. When the jam protection function operates, the seat stops at a position other than the set seat position. Check the seat position.
Recalling a driving position automatically when getting in the vehicle( memory recall function)( driver’ s seat only)
■ When an individual is identified using My Settings:
The driving positions can be automatically recalled for each driver registered in My Settings.( �P. 210)
• Driving position registration procedure
When the shift position is shifted to P after driving the vehicle, the current driving position will be recorded.
• Driving position recall procedure
1 Carry only the key that has been assigned and registered in My Settings, and then unlock and open the driver’ s door using the smart key system or wireless remote control.
The driving position will move to the recorded position.
If the driving position is in a position that has already been recorded, the
seat will not move.
2 Turn the power switch to ACC or ON.
The seat will move to the recorded position.
4
Before driving