2-2. Charging
135
When Plug & Charge related message is displayed
When a door is opened while the power switch is off after charging, a message will be displayed on the multi-information display.
If any of the following messages is displayed, follow the message and perform the appropriate correction procedures.
■ If“ Plug & Charge System Failure See Owner’ s Manual” is shown
Likely cause
Authentication with Plug & Charge has failed
Correction procedure
If this message is displayed, reconnected the charging plug and try charging.
If charging still does not start, turn the Plug & Charge setting off and start charging again.
If charging still does not start, contact the facility manager.
To use Plug & Charge again, turn the Plug & Charge setting on.
2
Electric Vehicle system