122 2-2. Charging
Likely cause
Error is detected by the DC charger or vehicle’ s system check.
The DC charger power goes off.
Traction battery is already fully charged
The EV system is started.
The upper limit of the charge capacity is lower than the remaining charge of the traction battery
DC charging was repeatedly performed
Correction procedure
There may be a malfunction with the DC charger or charging system.
• If there is a malfunction with the DC charger, contact the charging station manager.
• If there is not a malfunction with the DC charger, there may be a malfunction in the system. Contact your SUBARU dealer.
• If the EV system can not be started, contact your SUBARU dealer.
Contact the charging station manager and check the power status.
When the traction battery is fully charged, DC charging cannot be performed.
When the EV system is started, DC charging cannot be started.
Also, if the shift position is not in P, DC charging cannot be performed.
Set the upper limit of the charge capacity to a value higher than the current remaining charge of the traction battery, and then perform the charging procedure again.
After waiting a few minutes after starting the EV system, stop the EV system and perform charging again.