2026 Outback EyeSight Driving Assist System Manual | Page 260

Conventional Cruise Control
2. Switch to Conventional Cruise Control. Press and hold the /( Following distance setting) switch for approximately 2 seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control. A notification sounds 1 short beep. At this time, the following distance setting indicator on the combination meter display turns off and( Conventional Cruise Control indicator)( white) is displayed.
( 1)
H02498
H02901
( 1) Conventional Cruise Control indicator( white)
To set the ready status:
When all of the following conditions are
met,
( READY indicator) is displayed
on the combination meter display, and
( 1)
Conventional Cruise Control can be activated
.
-
All doors( except the rear gate) are
closed.
-
The driver’ s seatbelt is fastened.
-
The electronic parking brake is not
applied. The electronic parking brake indicator light is off.
-
The select lever is in the“ D” or“ M” position.
( 1) READY indicator
-
The brake pedal is not depressed.
-
The road is not a steep slope.
-
The steering wheel has not been turned significantly in either direction.
-
The X-MODE is turned off( the X-MODE indicator is off).
H02902
258