Active Lane Change Assist( if equipped)
How to use Active Lane Change Assist
Active Lane Change Assist operates when all of the following conditions are met and you signal a lane change with the turn signal lever.
� Refer to the vehicle Owner’ s Manual for details.
• Lane Centering Function is operating.
• The system has recognized the lane markings of your current lane and the lane you are changing to.( The lane indicator on the side of the lane change is illuminated.)
• Both of the rear radar sensors have detected a distant vehicle, etc. at least once since the engine was started.
• The vehicle speed is between approximately 50 mph( 80 km / h) and 90 mph( 145 km / h).
• You are driving on expressways, freeways or interstate highways, with at least two lanes traveling in the same direction.
• Driving on a road with median
• You are operating the steering wheel( if Hands-Free Assist is not in use).
• A vehicle has not been detected in the lane you are changing to or behind you.( The vehicle detection indicator for the neighboring lane is not illuminated.)
• The driver’ s eyes are on the road.
• The locator is not malfunctioning.( Locator system warning indicator) is off.
� Page 273
• The locator is not temporarily stopped.( Locator system temporary stop indicator) is off.
� Page 277
194