� When driving uphill, prevents unnecessary upshifting and downshifting.
� When driving downhill, downshifting is performed at engine speeds higher than usual.
� When driving on curves, prevents upshifting even when accelerating.
� When the brake pedal is depressed firmly, downshifting is automatically performed, fully utilizing engine braking.
� When the accelerator pedal is suddenly released, prevents upshifting. NOTE
Adaptive control operates automatically when the select lever is in the“ D” position. The function is canceled when the paddle shift levers are operated or the select lever is shifted to the“ M” position.
Depress the brake pedal first, and then operate the select lever.
� Only the“ P” position allows you to turn the push-button ignition switch to the“ OFF” position. ▼ Shift lock release
If the select lever cannot be operated, turn the ignition switch back to the“ ON” position then move the select lever to the“ P” position with the brake pedal depressed.
If the select lever does not move after performing the above procedure, refer to " Shift lock release using the shift lock release portion " �P241. ■ Shift Lock Function
The shift lock function helps prevent the improper operation of the select lever.
� The select lever cannot be operated unless the ignition switch is turned to the“ ON” position and the brake pedal is depressed.
� The select lever cannot be moved from the“ P” position to any other position before the brake pedal is depressed.