■ Stopping Engine 1. Stop the vehicle completely.
2. Move the shift lever to neutral( MT models) or select lever to the“ P” position( AT models).
3. Press the push-button ignition switch. The engine will stop, and the power will be switched off.
� If the engine stops during driving, do not operate the push-button ignition switch or open any of the doors until the vehicle is stopped in a safe location. It is dangerous because the steering lock may be activated. Stop the vehicle in a safe place, and contact a SUBARU dealer immediately. �
WARNING
Do not touch the push-button ignition switch during driving.
When the push-button ignition switch is operated as follows, the engine will stop.
– The switch is pressed and held for 2 seconds or longer.
– The switch is pressed briefly 3 times or more in succession.
When the engine stops, the brake booster will not function. A greater foot pressure will be required on the brake pedal.
The power steering system will not operate either. A greater force will be required to steer, and it may result in an accident.
CAUTION
For AT models:
� Do not stop the engine while the select lever is in a position other than the“ P” position.
� If the engine is stopped while the select lever is in a position other than the“ P” position, the power will be in“ ACC”. If the vehicle is left in this condition, the battery may be discharged.