2019 Smart City Solution 2019 Smart City Guide | Page 10

Railway M12 PoE L2/L3 Switch
2 Giga Link Bypass Ports
．Link Bypass function provides power fail safe solution
Management Features
．Various configuration paths, including WebGUI, CLI, Telnet, SNMP v1/v2c/v3
and RMON
．IEEE 1588v1/2 PTP time management, LLDP topology control
．Modbus/TCP, Ethernet/IP for factory automation
．M12 USB for easy field configuration and firmware update
．ViewMaster for LAN devices management and NetMaster for NMS Management
ITU-T G.8032 v1/v2 ERPS Ring Redundancy
．Provide sub-50ms protection and recovery switching for Ethernet traffic
．Interoperate with 3rd party industrial/commercial switch and instead of STP/RSTP still remain fast recovery time
．Efficient network interconnection and topology with ERPS Chain, multiple chains
Enhanced Cyber Security for Critical Application
．L2-L7 IPv4/IPv6 ACL, DHCP Snooping, IP Source Guard, DAI
．802.1Q VLAN, Private VLAN, Advanced Port Security, Multi-Level user passwords
．HTTPS/SSH/SFTP, 256-bit encryption, 802.1X MAB, RADIUS/TACACS+
Extreme PoE Capability
．8-port IEEE 802.3af/at compliant PoE, up to 30W/port
．Up to 100W system power budget at 70°C operating temperature
．Complete PoE management including per-port Power Budget Control, PoE Scheduling and PoE Status
Rugged Design for Surveillance in Rail, Rolling Stock applications
．EN50155/IEC61373 railway certification
．Railway 110VDC(77~137.5V) or 54V DC(46~57V) or 24/48/110V DC(16.8~137.5V) on-board power design
．Outstanding mechanical design with good heat dissipation and lightweight
．Rugged M12 connectors and -40°~70°C wide operating temperature for harsh environments
Model PoE Cooper
Ethernet Cooper
MP310 7xFE + 1xGE 802.3at 2xGE(Bypass)
L3 Managed L2 Managed Bypass ERPS v2 USB
-
Yes
Yes
Power Input
Vertical Standard
Yes 1xM12 110V DC(HV); 48/54V DC(MV)
EN50155
MP414 8 x GE 802.3at 4xGE + 2xGE(Bypass) - Yes Yes Yes 110V DC(HV); 48/54V DC(MV);
EN50155
1xM12
24/48/110V DC(WV)
MP614 8 x GE 802.3at 4xGE + 2xGE(Bypass) Yes Yes Yes Yes 1xM12
110V DC(HV); 48/54V DC(MV);
EN50155
24/48/110V DC(WV)
Rackmount L2/L3 Switch
10G High Throughput Ethernet Switching
．52-port Ethernet, including 48-port Gigabit Ethernet and 4-port 1/10GbE dual speed SFP+
．131Mbps maximum forwarding rate, and 176Gps switching capacity
．32K MAC address table, and 4MBytes packet buffer
Enhanced Cyber Security for Critical Applications
．ACL for L2/L3/L4, IPv6 ACL for L3/L4
．IP Source Guard, DAI, DHCP Snooping, 802.1X/RADIUS, TACACS+
．Port MAC secure learning, Private VLAN/IP Security/Port Security
．Private VLAN/IP Security/Port Security
Dynamic Routing with Redundancy Protection
．IPv4 and IPv6 routing: OSPF, OSPFv3, BGP4, and ECMP
．Multicast routing features for IGMP v1/v2/v3, PIM-DM/SM, MLD v1/v2 and PIM-DM6/SM6
．VRRP guarantees sustainable routing in a single point of failure
Management Features
．Various configuration paths, including WebGUI, CLI, SNMP and RMON
．IEEE 1588v1 PTP time management, LLDP topology control
．USB for easy field configuration and firmware update, ViewMaster for LAN devices
Rugged Design for Wayside Network Switching with Wide Power Input Range
．IEC61850/IEEE1613/EN50121-4 compliance for power substation and railway trackside
．NEMA TS2 compliance for wayside traffic control assemblies
Model
RS328
RS428v2
RS752
Cooper
24xFE
20xGE
48xGE
Fiber
4xGE Combo
4x2.5GE + 4xGE Combo
4x1GE/10GE SFP+
L3 Managed
-
-
Yes
L2 Managed
Yes
Yes
Yes
USB
Yes
Yes
-
Power Input
AC 110/220V
AC110/220V or 88~300VDC
2xAC 110/220V
Vertical Standard
NEMA TS2/EN50121-4
EN50121-4
-