2019 MSCN Catalogue Professional Motorsports Gear | Page 108
section
12
Thermal Protection
Heat Protection
Floor & Tunnel Shield
Floor and Tunnel Shield was designed to withstand direct temperatures up to 1750°F. Because of
its unique material, it is capable of insulating against unwanted road noise up to 50%. Constructed
utilizing an embossed 10 mil aluminium face bonded to a 1/8” composite fi berglass insulation,
Floor and Tunnel Shield is backed with an aggressive adhesive that holds past 450°F. Only 3/16”
thickness it requires minimal clearance and can be shaped and trimmed for a custom fi t.
Floor and Tunnel Shield provides the optimal way
to refl ect heat away from vehicle components and
perfect for protecting under hoods, fi rewalls, fuel
cells, exterior areas such as transmission tunnel,
fl oor pans and other under-vehicle locations.
FLOOR & TUNNEL SHIELD
PART NO. DESCRIPTION
DEI 050501 2ft x 12” Sheet (3.5 sq.ft)
DEI 050502 4ft x 21” Sheet (7 sq.ft)
DEI 050503 4ft x 42” Sheet (14 sq.ft)
• Excellent heat and sound barrier
• Self adhesive backing for easy installation
• Can be trimmed to fi t any shape
1
#
• Withstands 1750°F direct continuous heat
• Unique material works in harsh environments
BEST
SELLER
Reflect A Cool
Refl ect-A-Cool, constructed of fi berglass material backed with a layer of aluminised refl ective foil to
handle direct continuous temperature of 400°F has many uses such as covering fi rewalls, marine
engine compartments, RVs, in the tub of a racecar where typical mechanical fasteners cannot be
used and has many industrial uses.
Refl ect-A-Cool can be trimmed to fi t just about any shape. Just measure, trim, face refl ective side
towards source of radiant heat and remove self-
REFLECT-A-COOL
adhesive backing. It’s that easy.
•
•
•
•
Withstands 2000°F of radiant heat
Self adhesive for easy installation
Can be easily trimmed to size
Virtually NO clearance needed
PART NO. DESCRIPTION
DEI 010460 12” x 12” Sheet
DEI 010461 24” x 12” Sheet
DEI 010462 24” x 24” Sheet
DEI 010412 48” x 36” Sheet
Heat Shroud
Heat Shroud is made from a high temperature rated glass fi ber fabric with an aluminized outer
facing. Same as Heat Sheath but with the added convenience of hook & loop closure design
along the open edges. Without the need of removing one end of connected wires, cables and
hoses, simply wrap Heat Shroud around whatever needs protection and close edges.
•
•
•
•
•
•
Convenient hook & loop designed edges
Withstands 500°F direct continuous/2000°F radiant heat
No need to remove wires and hoses
Easily trimmed to length
Fireproof
1/2” to 1-1/4” diameters x 3 foot length
HEAT SHROUD
PART NO. DESCRIPTION
DEI010405 1/2” to 1-1/4” ID x 3ft
Fire Wrap 3000
Constructed from the same material as Fire Sleeve but with the
convenience of a hook & loop edge closure design. Simply wrap
Fire Wrap 3000 around wires, cables or hoses without the need of
disconnecting.
• Withstands direct heat up to 500°F
• Protects against oil, dirt, road grime and other contaminants
• Pliable enough to shape & fi t tightest bends
FIRE WRAP 3000
108
MOTORSPORT CONNECTIONS
PART NO. DESCRIPTION
DEI010477 5/8” ID x 24” (2ft)
DEI010478 1” ID x 24” (2ft)
DEI010479 1-1/2” ID x 24” (2ft)
WEBSITE www.mscn.com.au
EMAIL [email protected]