ADA COMPLIANT CABINETS
61
For more information on ADA compliance visit our website PCScabinetry.com and select Supporting Documentation under our Resources Tab.
How to Convert an ADA Cabinet
Phillips Head screwdriver is required for converting an ADA cabinet
Step 2 ADA VANITY:
Carefully remove doors and
set aside for later use Step 2A ADA COMBO VANITY:
After you remove the doors,
remove the two drawers
Step 3: Remove hinge plates
and set aside for later use Step 4: Unscrew header from bracket
with normal Phillips Head screwdriver Step 5: Remove floor screws (4)
To finish interior,
order an AP series
panel or skin
Step 5A ADA COMBO VANITY:
Remove the 4 floor screws
shown in top photo, and the
bracket screws in bottom photo
Step 6: Slide floor board out
and set aside for later use
Step 7: If desired, a chisel and hammer
can be used to remove blocks
Note: Without blocks, cabinet can
not be converted back
Step 1 ADA VANITY:
Empty contents of cabinet