2018 International Forest Industries IFI June July 2018 Digital | Page 35

SAWLINES – HewSaw
Spring of 2017 Is an R200 A.1 with
a 2R log positioner log-in system.
This new line replaced an older
model R200 that was installed back
in 1998 and then upgraded in 2003.
“There are three main features
on the new HewSaw that were
attractive to us,” explains Craig.
“First is the separate edging on
the new machine. It is working
very well for us and is allowing us
to produce top and bottom jacket
boards that are equal in quality to
the HewSaw production coming
from the ripsaw. Second is the
increased horsepower and some
heavier duty parts, which enable
us to now operate at feed speeds
of over 600 feet per minute (180
metres per minute). And lastly,
HewSaw’s integrated supplier
solution gave us confidence
in our new system as HewSaw
has partnered with experienced
suppliers in areas such as scanning
and optimization, machine
controls, and the hydraulic
system.”
OPERATION FOCUS
Over the years we have continued our
partnership with HewSaw and they have
responded with updated equipment that has
increased feed speeds and recovery. I have
to say, having a partnership and a long-term
relationship with a main supplier like HewSaw is
key to our success
Craig Ewashko, Mill Owner
The new HewSaw R200 A.1
positioned in the mill during the
installation process
The HewSaw R200 A.1 single
pass machine can process logs
from under 3 inches (7.5 cm)
to almost 14 inches (35cm) in
diameter and lengths from 8
feet (2.4 metres) to 20 feet (6
metres) plus, all in one pass. The
machine also features separate
edging on the top and bottom
boards, eliminating the need for
downstream edgers.
International Forest Industries | JUNE / JULY 2018 31