JUDGING
2. EQUIPMENT SPECIFICATIONS
Longboard Specifications
The board length is minimum 9 feet measured from the nose to the tail on the deck of
the surfboard
The width dimensions are to be a total minimum 47 inches in aggregate. This is the
total of the widest point, plus the width 12 inches up from the tail and 12 inches back
from the nose
Logger Specifications
The board length is minimum 9 feet measured from the nose to the tail on the deck of
the surfboard
The width dimensions are to be a total minimum 51 inches in aggregate. This is the
total of the widest point, plus the width 12 inches up from the tail and 12 inches back
from the nose
The board will have a single central fin that may be permanently fixed or attached via a
fin box. There must be no provision for any other fin configuration
The rails of the surfboard will be 50/50 or 60/40 from nose to tail
The board will have no resin edge from rail to tail
The fin will be at least 8 inches from its mounted base to the highest point
A provision for attaching a leg rope should be attached / inserted into the surfboard.
The use of leg ropes will determined by the conditions and at the Contest Director’s
discretion
The board will weigh a minimum of six (6) kilograms
SUP Specifications
All race boards must be of a single mould and with a fixed fin (except Prone 18’ open
rudder)
No straps will be allowed for SUP surfing events at the National Titles
All ocean racing SUP boards will be a maximum of 14 feet in length unless otherwise
specified
All prone race boards will be stock and a maximum 12 feet in length unless otherwise specified
NB. Team Australia competitors will have to compete on the ISA standard of 12’6 maximum.
www.surfingaustralia.com
45