14th-Edition-BriskHeat-Product-Catalog A | Page 16

SLCBL Your Heating Specialist since 1949 SLCBL Self-Regulating Heating Cable Product Highlights Ideal for freeze protection and low temperature process maintenance up to 149°F (65°C) Bus Wires - Tin Coated Copper CABLE / WIRE Automatically adjusts heat output based on surface temperature Conductive Core - Self-Regulating - Irradiation Crosslinked Safe to overlap and insulate Can be cut-to-length and terminated in the field Inner Jacket - Thermoplastic Elastomer No temperature controller is required* * If a specific process temperature is required, a temperature controller is necessary. Metallic Overshield - Tinned Copper Specifications: • Maximum continuous maintenance temperature: 149°F (65°C) • Maximum intermittent exposure temperature: 185°F (85°C) • Minimum intermittent exposure temperature: -40°F (-40°C) • Nominal power output at 50°F (10°C): 3, 5, 8, 10, 12 W/ft (10, 17, 25, 31, 40 W/m) • Supply voltages (AC): 110-120V or 208-277V • Moisture, chemical, and flame resistant • Bus wire gauge: 16 AWG • Braid resistance: Tinned copper 0.0055 ohms/ft (0.0182 ohms/m) • T6 Rating - 3, 5, 8, 10 W/ft (10, 17, 25, 31 W/m) • T5 Rating - 12 W/ft (40 W/m) Outer Jacket - Thermoplastic Elastomer (BP) - Fluoropolymer (BF) NOTE: Electrical equipment T-Rating codes define the maximum surface temperature that equipment will reach. It is used in hazardous (classified) area applications. Outer Layer Options: Product Type Description Nominal Dimensions Shipping Weight 500-ft (152m) spool Purpose SLCBL-B Tinned Copper Metal Braid 0.17” x 0.43” (4.4mm x 11.0mm) 35 lb. (16 kg) Ordinary applications SLCBL-BP Tinned Copper Metal Braid with Thermoplastic Elastomer Overjacket 0.23” x 0.50” (6.0mm x 12.6mm) 46 lb. (21 kg) For use in wet or weak chemical environments (i.e. weak acids) SLCBL-BF Tinned Copper Metal Braid with Fluoropolymer Overjacket 0.21” x 0.47” (5.4mm x 12.0mm) 44 lb. (20 kg) For use in strong chemical environments (i.e. strong acids) Ordering Information: Part Number Matrix Approvals: SLCBL 3 120 BP Watts/ft: 3, 5, 8, 10, 12 Ordinary Locations -B, -BP Series Only Voltage: 120- (110-120V), 240- (208-277V) Outer Layer: B- (Tinned Copper Metal Braid) BP- (Tinned Copper Metal Braid with Thermoplastic Elastomer Overjacket) BF- (Tinned Copper Metal Braid with Fluoropolymer Overjacket) 4 Toll Free: 800-848-7673 Phone: [phone] Ordinary and Hazardous (Classified) Locations Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups E, F, G Class III Approvals valid only when used with appropriate heating cable and installation accessories, and installed in accordance with all applicable instructions, codes, and regulations. See Page 10 & 11 for power connection/termination kits. w w w .BriskHeat. c o m Email: [email protected] Fax: [phone] © BriskHeat Corporation. All Rights Reserved. 16-03